When digging into the world of TCP, I get many terminologies I don’t know any misconceptions. But with the help of those geeks on SO, the problems were demystified. Now it’s time to sum up and share with others :D
What defines a unique connection ?
There are 5 elements that identify a connection. They call them 5-tuple
Protocol. This is often omitted as it is understood that we are talking about TCP, which leaves 4.
Source IP address.
Target P address.
Does TCP listen on one port and talk on another port ?
No. This is a common misconception. TCP listens on 1 port and talk on that same port. If clients make multiple TCP connection to server. It’s the client OS that must generate different random source ports, so that server can see them as unique connections
What is the maximum number of concurrent TCP connections that a server can handle, in theory ?
A single listening port can accept more than one connection simultaneously.There is a ‘64K’ limit that is often cited, but that is per client per server port, and needs clarifying.
If a client has many connections to the same port on the same destination, then three of those fields will be the same — only source_port varies to differentiate the different connections. Ports are 16-bit numbers, therefore the maximum number of connections any given client can have to any given host port is 64K.
However, multiple clients can each have up to 64K connections to some server’s port, and if the server has multiple ports or either is multi-homed then you can multiply that further
So the real limit is file descriptors. Each individual socket connection is given a file descriptor, so the limit is really the number of file descriptors that the system has been configured to allow and resources to handle. The maximum limit is typically up over 300K, but is configurable e.g. with sysctl
Concurrent connection request vs Concurrent open connection
When clients want to make TCP connection with server, this request will be queued in server ‘s backlog queue. This backlog queue size is small (about 5–10), and this size limits the number of concurrent connection requests. However, server quickly pick connection request from that queue and accept it. Connection request which is accepted are called open connection. The number of concurrent open connections is limited by server ‘s resources allocated for file descriptor.
Why connection is rejected after successful TCP handshake ?
It’s normal. When server receive connection request from client (by receiving SYN), it will then response with SYN, ACK, hence cause successful TCP handshake. But this request are stills in backlog queue.
But, if the application process exceeds the limit of max file descriptors it can use, then when server calls accept, then it realizes that there are no file descriptors available to be the allocated for the socket and fails the accept call and the TCP connection sending a FIN to other side
What are active and passive socket ?
Sockets come in two primary flavors. An active socket is connected to a remote active socket via an open data connection… A passive socket is not connected, but rather awaits an incoming connection, which will spawn a new active socket once a connection is established
Each port can have a single passive socket binded to it, awaiting incoming connections, and multiple active sockets, each corresponding to an open connection on the port. It’s as if the factory worker is waiting for new messages to arrive (he represents the passive socket), and when one message arrives from a new sender, he initiates a correspondence (a connection) with them by delegating someone else (an active socket) to actually read the packet and respond back to the sender if necessary. This permits the factory worker to be free to receive new packets
Where to go from here
Here are some more links to help you explore further
- What is the difference between a port and a socket?
- Passive and active sockets
- Why will a TCP Server send a FIN immediately after accepting a connection?
- What is the theoretical maximum number of open TCP connections that a modern Linux box can have
- socket listen backlog parameter, how to determine this value?
- Question about listening and backlog for sockets
- Rejecting a TCP connection before it’s being accepted?
- Best way to generate million tcp connection
- Max parallel http connections in a browser?
- How to retain one million simultaneous TCP connections?
- TCP RST packet details
- How many tuples are there in a connection?
- Does TCP use another port for sending data?